QL Electromagnetic Overhead Crane

Introduction of QL Electromagnetic Overhead Crane
QL Electromagnetic Overhead Crane can be applied to lift long section steel, bars, plates, scrap steel, mill coil, etc. The hook and carrier-beam are releasable connection. QL Electromagnetic Overhead Crane are equipped with electromagnetic hook underneath to lift materials. There are two layout types of carrier-beam: perpendicular to the girder or parallel to the girder.

Types of Revolving Hanger Bridge Crane
1. High level cab slewing mechanism.
2. Low level carrier-beam slewing mechanism.

Features of QL Electromagnetic Overhead Crane with Carrier-beam
1.Working class of this crane is heavy (A6).
2.Lifting weight is from 5t+5t to 20+20t, span is from 10.5m-31.5m.
3.Working environment is from -25℃ to +40℃.
4.It is prohibited to use the crane in the combustible , explosive or corrosives environment.
5.The direction of platform door to the driver’s cab is side, top and end.
6.The lifting capacity includes the weight of the carrier-beam.
7.The total weight does not include the weight of the carrier-beam.
8.Lock up the rotary part of the hanger of electromagnetic chuck with screws when used and rotation is not allowed.

How to Safely Operate Cranes
1.Operator should be familiar with the basic performance and functions of crane and grasp the general maintenance technology.
2.Check surrounding environment before starting and make sure no barriers.
3.Watch out surroundings during operation to avoid colliding with vehicles, people or other materials.
4.Overload lifting is prohibited.
5.Lift vertically, drag heavy materials with crane is not allowed.
6.Pay attention and make sure cable conductor do not be pressed by, collide with or worn away by heavy articles.
7.Mandatory brake by reverse operation is not allowed unless for avoiding emergency incident.
8.Cut off general power supply after stop working or power failure.
9.Operators can not be absence without leave during operation.

Technical Parameters of QL Electromagnetic Overhead Crane with Carrier-beam

QL Overhead crane with carrier-beam cap. 10+10t
QL Overhead crane with carrier-beam cap. 16+16t

Our QL Overhead Cranes Lifting weight is from 5t+5t to 20+20t, span is from 10.5m-31.5m. please tell your requirement and then we can send more detailed information to you.

Message Information

Content:
Name:
E-Mail: